The MANTAIR
range of sewage treatment conversion units provide a discrete, reliable
and cost effective solution to sewage treatment for domestic dwellings
and small scale commercial and industrial premises without mains
drainage, but where an existing septic tank or
cesspool is present.
Supplied to site as a purpose made singe
unit, the MANTAIR unit fits into the existing septic tank or cesspool,
effectively converting it into a small sewage treatment plant and no further filters or soakaway’s are therefore necessary.
The
long established principle of aerobic purificationis at the heart of
the Mantair™ system. Aeration of waste sewage encourages the growth of
aerobic bacteria which degrades the sewage. The effluent produced
complies with the requirements of the Enviroment Agency, for England
and Wales, and Scottish Environment Protection Agency for discharge
direct to a natural watercourse.
Complies with BS 6297 : 1983
Effluent to Environment Agency standard.
Benefits
It's the most economically installed treatment system
in the UK;
Does not require the installation of any tankage, thus avoiding the disturbance of established gardens;
The treatment plant is completely hidden from view;
Designed to produce an effluent in compliance with the Regulating Authorities;
Peace of mind with a lifetime Process Guarantee;
The efficient air blower is both quiet and economical with low running costs;
Integral surge control system;
Works in high water table areas;
It requires less than two hours maintenance per year;
Unique Design
The MANTAIR™ Conversion unit is the only sewage treatment unit in the
UK which converts existing tanks into sewage treatment plants. Each
Mantair™ Conversion unit is purpose-built to suit the depth, diameter,
invert depth and access shaft of the existing tank.
How Does It Work?
The Mantair™ Conversion Unit is powered by a small air blower, which can
be located in either an existing outbuilding or in a 'Beehive' – a
purpose built blower housing designed to blend into the natural
setting.
The blower can be located up to 25 metres
from the MANTAIR™ Conversion Unit and is powered by domestic 240v
electrical supply. It is a connected to the unit by a small bore MDPE
pipe concealed underground. The blower provides the air that is
required for the treatment process and to lift the treated effluent to
the discharge point.
Installation & Commissioning
The first stage is to carry out an initial survey of your existing
tank. This enables us to determine the condition of the tank and to
ascertain the dimensions required by MANTAIR™ to manufacture your unit.
Each conversion unit is custom built.
The second stage is the on – site installation. The MANTAIR™ unit when
installed stands on the floor of the existing tank. The tank must
therefore be emptied and all debris removed from the floor of the tank
prior to the installation taking place.
On the majority of sites only minor civil engineering works need to be
carried out. This minimises the disturbance to established gardens.
Finally the unit is commissioned by our operatives, to ensure optimum
operational effectiveness, of your MANTAIR™unit
Maintenance
The
Mantair™ Conversion Unit is simpler to maintain then most other
treatment plants as there are not electrical, mechanical or moving
parts within the underground treatment zone.
Technical information on the MANTAIR range of sewage treatment conversion units is available at
Mantair™ Conversion Units are proffessionally installed by one of our Licencesed Contractors;
Mantair™ Units are not available through wholesale or retail outlets;
All
Licencensed Contrators offer a comprehensive service. This includes an
initial site survey, guidance and advice on system selection., complete
installation and commissioning of your treatment plant and full after
sales sevice.
